Get a competitive quote for your Teesside paving project

Get a free, competitive quote for block paving, slab and flag paving, permeable paving, paving repairs and relaying, edging and kerbing, and commercial paving across Middlesbrough, Stockton, Billingham, Redcar, Hartlepool and every TS postcode. Prices quoted per square metre, with the sub-base build stated in writing.

  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ Fast turnaround
  • ✓ All TS postcodes covered
Curved block paved path through a landscaped garden area

Paving services in Teesside

Get a free, competitive quote for block paving, slab and flag paving, permeable paving, paving repairs and relaying, edging and kerbing, and commercial paving.

How it works

  1. Tell us about the job. Two minutes in the quote form, the area and surface you have in mind, your postcode.
  2. Get your free quote. Your job is priced properly and competitively, with a fast turnaround.
  3. You decide. Talk the quote through, ask questions, take your time. No charge, no pressure.

What does paving cost in Teesside?

Laid paving on Teesside in 2026 sits at £60 to £100 per square metre for block paving, £50 to £80 for slabs and flags, and £80 to £120 for a permeable build. A typical front drive of 40 square metres therefore lands somewhere between £2,400 and £4,000 in block, and a 20 square metre back patio between £1,000 and £1,600 in flags. Repairs and relaying start around £150 for a sunken patch, and edging or kerbing runs from £200.

Most of that money is under the surface. Excavation depth, the sub-base thickness, the amount of muck carted away and the drainage design set the real price, and the blocks or slabs on top are the visible part of a much larger build. Two prices for the same driveway can differ by a third simply because one digs 200mm of stone in and the other digs 100mm.

Typical Teesside paving prices (2026)
SurfaceTypical priceNotes
Block paving£60 to £100 per m²Drives, paths, patios
Slab and flag paving£50 to £80 per m²Porcelain and stone sit higher
Permeable paving£80 to £120 per m²SuDS-compliant build
Repairs and relayingfrom £150Sunken patches, re-sanding
Edging and kerbingfrom £200Per run, supplied and set
Commercial pavingquoted per jobCar parks, yards, forecourts

The square-metre figures, worked through on real Teesside drive and patio sizes, are in the 2026 paving cost guide.

Teesside ground makes Teesside paving

The patch is not one soil. Much of Middlesbrough, Thornaby and Stockton sits on heavy boulder clay, which holds water, moves with the seasons and punishes a thin sub-base within a couple of winters. The reclaimed and made ground on the old industrial fringes near Grangetown and the Tees banks can hide anything from ash to slag, so trial digging matters before a price is fixed. The coastal strip through Redcar and Saltburn adds wind-blown sand and salt-laden air, which is why jointing choice and a properly compacted base matter more here than in a sheltered inland garden. And on the 1990s and 2000s estates at Ingleby Barwick and Wynyard, the original builder driveways are now reaching the age where the blocks are sound but the edges and joints have given up.

What a serious paving quote looks like

Paving is easy to price cheaply and expensive to put right, so the quote should describe the build, not just the finish.

Where to start

Three questions cover most paving projects: what should it cost, which surface suits the job, and what the drainage rules require. The cost guide gives 2026 figures by surface and area, block paving against slabs settles the choice for drives, paths and patios, and the permeable paving and SuDS guide explains when planning permission enters the picture. If the plan is already clear, the quote form is the quickest route, or get in touch.

Get a competitive quote for your Teesside paving project

Competitive pricing, quoted properly for your job. No charge, no pressure.

Get Quote
  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ All TS postcodes covered

Where we cover

Paving across the whole Teesside patch, from the Redcar and Saltburn coast inland to Yarm and the Wynyard estates.

Full details on the areas we cover page.

Frequently asked questions

How much does paving cost in Teesside?

Block paving £60 to £100 per square metre laid, slabs and flags £50 to £80, permeable builds £80 to £120. A 40 square metre front drive in block therefore runs roughly £2,400 to £4,000 depending on the dig, the drainage and the materials.

How long does a driveway take to lay?

A standard front drive is usually a three to five day job: dig out and cart away, sub-base laid and compacted, edgings set, then blocks laid, cut in, jointed and vibrated. Wet weather and awkward access stretch it.

Is the quote really free?

Yes. The area gets measured and looked at, the price comes back in writing with the build described, and you decide in your own time. No charge and no pressure.

Do I need planning permission for a new driveway?

Not if the surface is permeable, or if water drains to a lawn or border rather than to the road. Impermeable paving over five square metres draining to the highway does need permission. The SuDS guide explains it.

Can old block paving be lifted and relaid?

Often, yes. Where the blocks are sound and the failure is a sunken area, a spread base or tired jointing, lifting, correcting the base and relaying the existing blocks costs far less than starting again.

Paving guides for Teesside homeowners

Get a competitive quote for your Teesside paving project

Competitive pricing, quoted properly for your job. No charge, no pressure.

Get Quote
  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ All TS postcodes covered